SEBU8605-01 33
Operation Section
Lifting and Storage
4. Remove the driv
e belt from the engine.
Sealed Coolant System
Ensure that the cooling system is filled with Perkins
ELC, or an antifreeze that meets “ASTM D6210”
specificatio
n.
Open C ooling System
Ensure that all cooling drain plugs have been
opened. Allow the coolant to drain. Install the drain
plugs. Plac
e a vapor phase inhibitor into the system.
The coolant system must be sealed once the vapor
phase inhibitor has been introduced. The effect of the
vapor phas
e inhibitor will be lost if the cooling system
is open to the atmosphere.
For mainte
nance procedures ref to this Operation
and Maintenance Manual.
Aftertre
atment
No special procedures are required. The exhaust
outlet o
f the aftertreatment should be capped. Before
storing, the engine and the aftertreatment must be
enclosed in a cover.
Monthly Ch ecks
The cra
nkshaft must be rotated in order to change
the spring loading on the valve train. Rotate
the crankshaft more than 180 degrees. Visibly
check f
or damage or corrosion to the engine and
aftertreatment.
Ensur
e that the engine and aftertreatment are
covered completely before storage. Log the
procedure in the record for the engine.
To Next Page
Loading...
