SEBU8337 5
Safety Section
Safety Messages
Safety Section
i02767956
Safety Message s
g01384682
Illustration 1
Location of safety m essage
There may be several specific safety messages on
your engine. The exact location and a description of
the safety messages are reviewed in this section.
Please become familiar with all safety messages.
Ensure that all of the safety messages are legible.
Clean the safety messages or replace the safety
messages if the words cannot be read or if the
illustrations are not visible. Use a cloth, water,
and soap to clean the safety messages. Do not
use solvents, gasoline, or other harsh chemicals.
Solvents, gasoline, or harsh chemicals could loosen
the adhesive that secures the safety messages. The
safety messages that are loosened could drop off
of the engine.
Replace any safety message that is damaged or
missing. If a safety message is attached to a part
of the engine that is replaced, install a new safety
message on the replacement part. Your Perkins
distributor can provide new safety messages.
Universal Warning (1)
The safety message for the universal warning is
locatedonbothsidesofthevalvecoverbase.
g00934493
Illustration 2
To Next Page
Loading...
