Perkins 35943 - General Data; Engine Specifications

35943 Chapter 9
Page 41
General data
Engine
Number of cylinders.........................................................................................................................................4
Cylinder arrangement ..............................................................................................................................In line
Cycle............................................................................................................................................... Four stroke
Induction system:................................................................................................................ Naturally aspirated
Combustion system ...................................................................................................................Direct injection
Nominal bore ........................................................................................................................ 97,0 mm (3.82 in)
Stroke ................................................................................................................................. 100,0 mm (3.94 in)
Compression ratio .................................................................................................................................. 17.5:1
Cubic capacity ......................................................................................................................2,9 litres (183 in
3
)
Firing order ......................................................................................................................................... 1, 3, 4, 2
Valve tip clearances (cold) .................................................................................................. 0,35 mm (0.014 in)
Lubricating oil pressure (maximum engine
speed and normal engine temperature) ........................................................420 kPa (61 lbf/in2) 4,3 kgf/cm
2
Capacity of a typical lubricating oil system:
(1)
- includes oil lter ..............................................................................................................9,4 litres (16.5 pints)
- sump only ..........................................................................................................................9 litres (15.8 pints)
Typical coolant capacity (engine only): ............................................................................ 8,75 litres (15.4 pints
Direction of rotation ....................................................................................................Clockwise from the front
Battery ..........................................................................................................One 12V, 540A SAE or 340A IEC
Weight of the engine (wet): ........................................................................................................ 277 kg (611 lb)
(1)The capacity of the sump will vary according to the installation angle. Fill to the “Full” mark on the dipstick. Do not exceed the “Full”
mark, see “Caution” on page 24.