Chapter 4 N39453
Page 90
Supplementary tools
A general tool kit and an on-board spares kit are available from your Perkins distributor. It is recommended that
the tools and other parts, listed below, are also retained on-board:
Wire, 20 SWG (1 mm in diameter)
Insulation tape
Jointing compound
Magnet (keep this away from the compass)
Mechanical ngers
Self-gripping wrench
Suitable lagging material
A small hacksaw, with extra blades
Power take-off
A power take-off is available, which is either belt driven off the crankshaft pulley, or driven axially off the
crankshaft pulley, for details refer to:
Wimborne Marine Power Centre,
22 Cobham Road
Ferndown Industrial Estate,
Wimborne,
Dorset BH21 7PW
Tel: (44) (0)1202 796000
Fax: 44) (0)1202 796001
To Next Page
Loading...
