Permobil Explorer Mini - Page 136

Explorer Mini Electromagnetic compatibility
The Explorer Mini and the battery charger (PF2401A5SL) are intended for use in the electromagnetic environment specified
below. The customer or the user of the Explorer Mini and the battery charger (PF2401A5SL) should assure that they are used in
such an environment
Explorer Mini Electromagnetic environment guidance
Immunity test
Test level
according to IEC
60601
Compliance level Portable and mobile RF communications equipment should be
used no closer to any part of the Explorer Mini and the battery
charger (PF2401A5SL), including cables, than the
recommended separation distance calculated from the equation
applicable to the frequency of the transmitter.
Recommended separation distance
d =[3.5/V
1
]√ P
d
=[3.5/E
1
]√ P , 80 MHz-800 MHz
d =[7/E
1
]√ P , 800 MHz-2.5 GHz
where
P is the maximum output power rating of the transmitter
in watts (W) according to the transmitter manufacturer and
d is
the recommended separation distance in meters (m).
Field strengths from fixed RF transmitters, as determined by an
electromagnetic site survey
a
, should be less than the compliance
level. Interference may occur in the vicinity of equipment
marked with the following symbol:
Radiated RF
IEC 61000-4-3
20 V/m
80 MHz-2.5 GHz
20 V/m
Battery charger (PF2401A5SL)
Immunity test Immunity test
Compliance level
Conducted RF
IEC 61000-4-6
3 V
ms
150 kHz-80 MHz
3 V
ms
Radiated RF
IEC 61000-4-3
3 V/m
80 MHz-2.5 GHz
3 V/m
136