Pfaff 1243 - Set-up and Initial Commissioning; General Machine Set-up Requirements; Adjusting Table Height

Controls
7 - 2
7.03 Pedal
(on machines with automatic backtacking mechanism and presser foot
lifter -911/97)
0 = Neutral position
+1 = Sew
-1 = Lift presser foot or roller presser
-2 = Trim thread (on machines with
thread trimmer -900/56)
For other pedal functions see
the motor instruction manual.
Fig. 7 - 03
0
+1
-1
-2
7.04 Pedals (on machines with presser foot lifter -910/01)
0 = Neutral position
+1 = Sew
-1 = Trim thread (on machines with
thread trimmer -900/56)
+2 = Lift presser foot or roller presser
For other pedal functions see
the motor instruction manual.
Fig. 7 - 04
0
+ 1
+ 2
- 1