Controls
7 - 5
7.09 Feed regulator
(on machines with automatic backtacking mechanism and presser foot
lifter -911/97)
● The forward stitch length is set by
turning the knurled screw 1.
● The reverse stitch length is set by
turning the knurled screw 2.
You can set the length of the
reverse stitch as long as
required, independent of the
foward stitch.
The options for setting the
automatic start and end
backtacks are to be found in
the instruction manual of the
motor.
Fig. 7 - 09
2
1
To Next Page
Loading...
Need help?
General
