To Next Page

To Previous Page

Adjustment

15.08 Error messages and description

Error Description

ERROR: 1 System error

ERROR: 2 Sewing motor

ERROR: 3 Seam zone data

ERROR: 4 End of section

ERROR: 5 Pedal activated when machine switched on

ERROR: 6 Communication error with stepping motor processor

ERROR: 7 End of ramp

ERROR: 8 End position of needle drive not found

ERROR: 9 Centre position of needle drive not found

ERROR: 10 Error of stepping motor processor

ERROR: 11 Stepping motor stepping frequency too high

ERROR: 12 Error in sewing start deﬂ ection

ERROR: 13 Error in docu-seam system

ERROR: 14 Incorrect program number (larger than 99)

ERROR: 15 Incorrect section number

ERROR: 16 Memory full

ERROR: 17 Incorrect stitch length

ERROR: 18 Free

ERROR: 19 Interface to external controller

ERROR: 20 Wrong control

ERROR: 21 Power supply unit overloaded(24V)

ERROR: 22 Mains voltage

ERROR: 23 Power supply 24V too low

ERROR: 24 Error CAN interface

ERROR: 25 Free

ERROR: 26 Free

ERROR: 27 Error SD card E27 / xx

15.09 Warning messages

Message Description

Warning 2 Bobbin thread error

Pfaff 1591 Adjustment Manual

Other manuals for Pfaff 1591