Pfaff 1591 Adjustment Manual

Adjustment
37
15.07.03 List of parameters for control P320 and 321
The parameter “100” is accessible to the operator.
Changing of the parameters “200” - “800” can only be carried out after enter-
ing the code number and may only be performed by authorised and qualifi ed
personnel.
Group Parameter Description Setting range Set value
1
101 Pedal controlled start backtack ON - OFF OFF
102 Reverse rotation ON - OFF OFF
103 Placed stitch ON - OFF OFF
104 Bobbin thread monitor
0 = off, 1 = counter, 2 = thread monitor
0 - 2 0
105 Bobbin thread counter 0 - 99999 12000
106 Remaining bobbin thread counter 0 - 999 100
107 Stitch length at the touch of a button (parameter
stitch)
0.8 - 7.0 4.0
108 Display main processor software version 0329/xxx -
110 Display control panel software version VxxHxx -
111
Display sewing drive component software ver-
sion
Vxx -
112 Control panel key tone ON - OFF ON
113 Key tone when switching over between zones ON - OFF OFF
116 Show serial number of the machine
2
201 Machine confi guration (15xx)
1 = 15x1, 15x3; 2 = 15x1, 15x3 with photocell
1 - 7 1
202 Roller presser lowering speed
OFF = slow, ON = fast
ON - OFF OFF
203 Single stitch key assignment,
1 = single stitch, 2 = double stitch, 3 = parameter
stitch, 4 = needle up, 5 = knee switch, 6 = Unlock
stop using the scroll key
1 - 6 1
204 Half stitch key assignment,
1 = half stitch, 2 = double stitch, 3 = parameter
stitch, 4 = needle up, 5 = knee switch, 6 = Unlock
stop using the scroll key
1 - 6 1

Pfaff 1591 Specifications

General

Brand	Pfaff
Model	1591
Category	Sewing Machine
Language	English