9 - 9
Setting up
112-035
112-005
2
1
9.10 Adjusting the differential feed on the PFAFF 3704-2/..
Fig. 9 - 12
Fig. 9 - 13
Standard value:
● Set the value with which the machine will usually operate on lever 1.
Fullness:
● Set the required deviating value (e.g. for fullness) on lever 2.
By pressing the knee switch, it is possible to switch between the standard
value and fullness, see Chapter 7.14 Knee switch.
Setting displayed on display unit 3:
Display white = fullness
Display green = standard value
3
To Next Page
Loading...
Need help?
General
