Pfaff 3704-2/03 User Manual

12 - 55
Adjustment
1 101 Control panel key tone A, B, C ON - OFF ON ON
(OFF / ON)
105 Backtack speed at beginning of seam B, C 300 - 2000 1200 600
110 Backtack speed at end of seam B, C 300 - 2000 1200 600
6 605 Speed display B, C ON - OFF OFF OFF
(OFF / ON)
606 Min. speed (level 1) B, C 300 - 6000 180 100
607 Max. speed (level 12) B, C 300 - 6000 4500 2000
609 Cutting speed B, C 60 - 500 180 100
660 Bobbin thread control A, B, C 0 - 2 0 0
0 = off
1 = thread monitor
2 = reverse counter
7 700 Needle position 0 B, C 0 - 255 0 0
Needle at penetration point, left
(needle reference position)
702 Needle position 1 (needle lowered) B, C 0 - 255 70 26
703 Needle position 2 (take-up lever raised) B, C 0 - 255 222 113
705 Needle position 5 (end of cutting signal 1) B, C 0 - 255 196
706 Needle position 6 (start of cutting signal 2) B, C 0 - 255 136 60
707 Needle position 9 B, C 0 - 255 150 60
(start thread tension release)
746 Switchover position from multi-stitch B, C 0 - 255 90 90
to zig-zag stitch
748 Key allocation for switchover position B, C 1 - 7 7 5
797 Hardware test B, C ON - OFF OFF OFF
(OFF / ON)
798 User level A, B, C 0, 1, 11 0 0
0 = User level "A"
1 = Mechanic level "B"
11 = Service level "C"
12.07.03 Liste der Parameter
Group Parameter
Setting range
Setting value for PFAFF 3704-2/02 User level Description
Setting value for PFAFF 939 U / PFAFF 3704-2/03

Pfaff 3704-2/03 Specifications

General

Brand	Pfaff
Model	3704-2/03
Category	Sewing Machine
Language	English