Pfaff 3704-2/03 - Multi-stitch;Zigzag and Backtack Setup

9 - 10
Setting up
9.11 Adjusting the multi-stitch or the zigzag stitch
(on the PFAFF 939 U with Quick-flange motor)
9.11.01 Changing from zigzag stitch to multi-stitch
Before sewing begins, make
sure that adjustment wheel 1 is
locked in position! Only switch
over when the machine is at a
standstill! Danger of machine
damage!
● Bring the machine into a switching
position by operating key 2.
● Pull adjustment wheel 1 and turn it in the
direction of the arrow until it clicks into
position.
Fig. 9 - 14
1
9.11.02 Changing from multi-stitch to zigzag stitch
Before sewing begins, make
sure that adjustment wheel 1 is
locked in position! Only switch
over when the machine is at a
standstill! Danger of machine
damage!
● Bring the machine into a switching
position by operating key 2.
● Pull adjustment wheel 1 and turn it in the
direction of the arrow until it clicks into
position.
Fig. 9 - 15
1
2
2