Pfaff 487

20
Installation and commissioning
Fig. 8 - 03
Fig. 8 - 02
1
4
2
109-001
3
1
2
109-020
8.01.03 Tightening the V-belt
Fit the V-belt.
Loosen nut 1 and tighten the V-belt by
turning motor mounting
2.
Tighten nut 1.
●
●
●
8.01.02 Assembling the motor (only on machines with Quick-motor)
Assemble motor mounting 1, motor 2, belt guard support 3 and belt pulley 4 as shown in
Fig.
8-02.
●