4
1 General Notes
The machine may only be set-up and commissioned by qualifi ed personnel!
All notes in Chapter 1 Safety of the Instruction Manual must be observed!
There must be suitable electrical connections at set-up site, see Chapter 3
Specifi cations of the Instruction Manual. A fi rm, level surface and adequate
lighting must also be available at the set-up site.
If the machine was delivered without a table, both the stand and the table top
intended for use must be constructed for a weight of at least 100 kilos.
1.01 Explanation of the symbols
In these Set-Up Instructions, symbols emphasize operations to be carried out or
important information. The symbols used have the following meaning:
Note, information
Service, repair, adjustment, maintenance
(work to be carried out by qualifi ed staff only
Safety symbols
Danger!
Points to be observed.
Danger of injury for operating and specialist personnel!
General Notes
To Next Page
Loading...
