Pfaff powerline 2235 Setup Instructions

34
Fig.6 - 08
1
6
.08 Mounting / connecting the maintenance unit
● Attach maintenance unit 1 to the stand with two screws M6 x 25.
● Connect the maintenance unit to the machine’s pneumatic tube.
To ensure the perfect functioning of all pneumatic devices, there must be a sup-
ply system pressure of between 8 and 10 bar.
The operating pressure is 6 bar (also see Chapter 9 Care and Maintenance of
the instruction manual).
Installation

Pfaff powerline 2235 Specifications

General

Brand	Pfaff
Model	powerline 2235
Category	Sewing Machine
Language	English