13
START SEWING
Speed adjustment lever
The speed adjustment lever can control
the sewing speed. To increase the speed,
slide the lever to right. To decrease the
sewing speed, slide the lever to the left.
Foot control
With the sewing machine turned off, insert
the foot control plug into its connector on
the sewing machine.
Turn on the sewing machine, and then
slowly depress the foot control to start
sewing.
Release the foot control to stop the
sewing machine.
Please Note: The setting of the speed control slide will limit the maximum speed of the
machine.
Attention: Consult a qualifi ed electrician if in doubt as how to connect the machine to the
power source. Unplug the power cord when the machine is not in use.
The appliance must be used with the foot controller C-9000.
To Next Page
Loading...
Need help?
General
