55
Recall and sew the memorized pattern
1. Press the “
“ button to enter the memory
mode. The machine will be positioned at the
fi rst programmed stitch.
2. Press foot control. The machine will start to sew
from fi rst entered pattern. On the LCD screen,
sewing stitch data is indicated.
3. If you wish to check what is programmed or if you
wish to start sewing a few stitches in the memory
mode, use the “
” button or “ “ button.
You can use the Auto-lock “ “ function when the
sewing machine is stopped.
Please Note: If you wish to repeat your stitch combination without having the machine
stop press the Auto-lock “ “ button to cancel the Auto-Stop in the memory mode. The
will disappear from the LCD screen.
4. Press the “ “ button to leave the memory mode
and return to the Direct mode.
To Next Page
Loading...
