53
MEMORY
Combined patterns can be stored for later use. Since stored patterns are not lost after the
sewing machine is turned off, they can be recalled at any time. This is convenient for patterns,
such as names, that will be used often.
Please Note:
- The machine has a program memory that can retain 30 units of stitches.
- Multiple patterns selecting from pattern modes “ , “ can be combined and
sewn together.
- All the units in the memory can be edited to set its function such as Stitch length, Stitch
width, Mirroring and Auto-lock.
- The Direct mode patterns and buttonholes can not be programmed.
1. When you turn the machine “ON”, the LCD screen
displays “ “.
2. Press the “ “ button to enter the memory mode
and program combinations of letters or decorative
stitches.
3. Press the “ “ button to select any desired
pattern among “ ” or “ ” on the LCD
screen. Then press the desired pattern number
(E.g.13). (You can change the stitch length, width,
or choose the Auto-stop, mirroring function if
desired.)
Repeat step 3 for more patterns to be stored in the
memory.
Please Note: When the maximum of 30 units
of patterns has been programmed, the machine
will beep to signal the memory is full.
Program patterns
To Next Page
Loading...
Need help?
General
