29
Stitch length button
MODE selection button
When you select a stitch the machine will
automatically set the recommended stitch length
which will be indicated by numbers on the LCD
screen. The stitch length can be adjusted by
pressing the stitch length adjustment buttons.
To shorten the stitch length, press the “-“ button
(left). For a longer stitch length, press the “+”
button (right). The stitch length can be adjusted
between “0.0-4.5”. Some stitches have a limited
length.
When you turn the machine “ON” the LCD screen
display will be set to direct mode “ “.
Press the “
“ button to switch to patterns mode,
“ ”. If you press the function button again, the
alphabet mode will be displayed “ “.
After a third press the machine will go back to
direct mode “ ”.
Direct mode stitch selection.
Utility and decorative pattern mode:
Stitch selection using number buttons.
Block letter mode:
Character selection using number buttons.
To Next Page
Loading...
Need help?
General
