50
FREE-MOTION, DARNING, EMBROIDERY AND MONOGRAMMING
Move the feed dog adjustment lever to “ “
to lower the feed dogs.
Remove the presser foot holder, and attach
the free-motion/darning foot to the presser
foot holder bar. The lever (a) should be
behind the needle clamp screw (b). Press the
free-motion/darning foot on fi rmly from behind
with your index fi nger and tighten the screw
(c).
Darning
Please Note: Free-motion darning is accomplished without the sewing machine internal
feed system. Movement of the fabric is controlled by the operator. It is necessary to
coordinate sewing speed and movement of fabric.
First sew around the edges of the hole (to
secure the threads). Working from left to
right, sew over the hole in a constant and
continuous movement. Turn the work by 1/4
and sew over the fi rst stitching moving the
work slower over the hole to separate the
threads and not form big gaps between the
threads.
To Next Page
Loading...
