58
MAINTENANCE
Attention: Disconnect the power cord from the wall socket before cleaning the screen
and sewing machine surface, otherwise injury or electrical shock may result.
Cleaning the screen
If the front panel is dirty, wipe it gently with a
soft, dry cloth.
Do not use any organic solvents or detergents.
Cleaning the sewing machine surface
If the surface of the sewing machine is dirty, lightly soak a cloth in mild detergent, squeeze it out
fi rmly and then wipe the surface. After cleaning it once in this way, wipe the surface again with a
dry cloth.
Cleaning the hook
If lint and bits of thread accumulate in the hook, this will interfere with the smooth operation of the
machine. Check regularly and clean the stitching mechanism when necessary.
Attention: Disconnect the machine from the wall outlet
before carrying out any maintenance.
1. Remove the bobbin cover plate and
bobbin.
2. Clean the bobbin holder with a brush.
To Next Page
Loading...
Need help?
General
