41
3. Select the buttonhole stitch. Adjust the
stitch width and the stitch length to the
desired width and density.
4. Position the fabric under the presser foot
so that the buttonhole mark is aligned with
the center of the buttonhole foot.
Pull down the buttonhole lever, then push
it to the back.
Please Note: When you select any
buttonhole pattern the LCD screen will
display the fi gure “
“ to remind you
to lower the buttonhole lever.
5. Start sewing while lightly holding the end
of the upper thread.
Please Note: The machine will
automatically sew a reinforcement stitch
after the buttonhole is sewn.
Starting
point
To Next Page
Loading...
Need help?
General
