8
5. Stitch width
Press this button to adjust the width of the stitch.
6. Pattern mirroring
Press this button to sew a mirrored pattern.
7. Mode selection
Press this button to select direct mode, utility and decorative pattern mode or block letter
mode.
C. Memory buttons
8. Clear button
If an incorrect pattern is selected or programmed, pressing this button will clear it.
9. Arrow button
Press the “
“ button or “ “ button until the desired stitch number in the programmed
combination is displayed.
10. Memory button
Press this button to enter or store the programmed pattern combination in the memory.
D. Selection buttons
11. Direct pattern selection and number buttons
Instant access to direct pattern or press the pattern number to select the desired pattern.
To Next Page
Loading...
