1918
Connecting a USB 3.0 Cable
to a Computer
Connecting iXG to a computer using a USB 3.0 cable:
1. Insert the end of the USB 3.0 cable to the USB 3.0 port of
the camera.
2. Connect the other end of the USB 3.0 cable to the USB
port of your computer.
Note: Make sure you are using the computer’s USB 3.0 port.
5. Installing Capture One
Activating Capture One
The following section provides the required procedures to
activate Capture One application.
Activating options include:
• Activating Capture One CH for Mac
• Activating Capture One Pro for Mac
• Activating Capture One DB for Mac
• Activating Capture One Pro/DB for Windows
Note: Ensure that you have an Internet connection to activate
Capture
One (CH).
Activating Capture One CH
for Mac
To activate Capture One CH for Mac:
1. Launch the software from the Finder and IMMEDIATELY
press and hold the “C” key.
2. You should then see the COCH activation screen with the 3
options “Try, Buy or Activate”.
USB Port
To Next Page
Loading...
