4544
6. To update the camera to the latest firmware, click Update.
The firmware is written to the camera and a cog icon
is
displayed next to the MAIN component and a progress bar
displays the progress of the update.
7. Upon a successful completion of the update, the MAIN
component is marked with a green check mark icon.
8. If the update fails, disconnect both the USB and the cables
and reconnect them again, then repeat the procedure
described above.
9. Select Update Firmware from the Firmware menu and the
back automatically detects and implements the update
from the card.
A progress bar appears on screen during installation.
Restoring the iXG Camera
Firmware
In the event you need to restore the camera’s firmware to the
factory version.
1. Go to Menu.
2. Select Restore Firmware.
The original firmware is installed.
3. Click the check sign to approve.
The original firmware is installed.
To Next Page
Loading...
