PhaseOne iXG - Activating Capture One PRO for Mac

2120
3. Press Activate.
4. It may take a few tries just to get the timing right. Repeat
steps 1-2 as needed.
Note: If you already have a running, licensed version of
Capture One PRO, you need to de-activate it before you
perform the above (see Activating Capture One Pro for Mac).
The License dialog opens.
5. Enter the Capture One CH license key you were provided
with by your Phase One CH partner and enter your email
address that is used in your Phase One user profile, then
press Get Profile.
6. Click Activate License. Your license is validated by Phase
One’s Activation Server.
Your software is now activated and ready for use.
Activating Capture One PRO
for Mac
To activate Capture One Pro for Mac:
1. From the Capture One 10 menu, select Licence.
The following message appears:
2. Click Change Licence.
Capture One application is closed.