98
Dismounting a Lens
from the iXG Camera
Lenses on the iXG series of cameras are easily dismounted.
Note: Ensure that you only dismount lenses in a clean
environment. Place the detached lens on a soft cloth on the
table to avoid scratching the lens.
To dismount the lens:
1. Release the lens' locking levers.
2. Remove the lens by pulling it gently away from the camera.
Note: If no lens is being mounted, ensure that the camera is
stored in a way to protect it from dust, moisture and other
damage. When the IXG camera is mounted facing down
always make sure (double check) that the lens is well secured
by having the lens locking levers engaged.
3. Mounting/Dismounting
a Lens
NOTE: Before mounting or dismounting a lens, ensure that
the power cable is not attached to the camera.
Lens Locking
Lever
Lens
To Next Page
Loading...
