PhaseOne iXG - Configuring HDMI Mode; Selecting HDMI Crop; Selecting Video Exposure Mode; Adjusting Lightness

3736
Configuring HDMI Mode
To configure the HDMI output:
Go to Home screen > HDMI > HDMI Mode.
The HDMI Mode screen appears.
Selecting HDMI Crop
To select the HDMI crop:
1. Go to Home > HDMI > Crop.
The Crop screen appears.
2. From the Crop screen, select one of the available crops:
• 16:9
• Full sensor 4:3
• Zoom 100%
The HDMI Control screen appears with your selection displayed.
Selecting Video Exposure Mode
To select the HDMI Exposure Mode:
1. Go to Home screen > HDMI > Exposure Mode.
The Exposure Mode screen appears.
2. From the Exposure Mode screen, select either:
• Auto
• Manual
The HDMI Control screen appears with your selection displayed.
Note: If Auto is selected, follow the instructions in “Adjusting
Lightness” below.
If Manual is selected, follow the instructions in TBD to
achieve an optimum balance for display.
Adjusting Lightness
The HDMI output can be changed to be lighter or darker.
To adjust the lightness:
1. Go to Home screen > HDMI.
The HDMI Control screen appears.
2. Adjust the lightness by dragging your finger along the lightness
scale (0 to 100) and viewing the results on your external display.