PhaseOne iXG - Adjusting ISO; Adjusting Exposure Time

3938
Adjusting ISO
When using Manual Mode, the sensitivity can be raised or
lowered to produce dierent results on your monitor.
To adjust the ISO:
1. Go to Home screen > HDMI > ISO.
The ISO screen appears.
2. Select a desired ISO. (50 to 12,800).
The HDMI Control screen appears with your selection displayed.
Adjusting Exposure Time
When using Manual Mode for video, the exposure time can
be adjusted to produce dierent results on your monitor.
To Adjust Exposure Time:
1. Go to Home screen > HDMI > Exposure Time.
The Exposure Time screen appears.
An asterisk appears next to the suggested exposure time,
which is based on the HDMI Mode that was previously selected.
2. Select a desired exposure time.
The HDMI Control screen appears with your selection displayed.