4342
Installing the Firmware
Updater Application
Download the Firmware Updater from the Downloads
section of the industrial.phaseone.com website and follow
the appropriate installation instructions below:
Mac
To install the Firmware Updater on a Mac:
1. Open the zip file and copy the Firmware Updater
application to your Applications folder.
2. Double-click the icon to start the Firmware Updater Setup
Wizard.
Windows
1. Open the zip file and store the FWUpdater.msi.
2. Double-click FWUpdater.msi to start the Firmware
Updater Setup Wizard.
3. When installation completes, click Start > Phase One >
Firmware Updater.
Updating the iXG
Camera Firmware
Steps for updating are the same on both Mac and Windows
— screenshots come from the Mac version
Before starting, ensure that:
• The camera is powered ON.
• USB 3.0 is connected to the back and to the computer.
• Your computer has the Firmware Updater application
installed and the computer is connected to the Internet.
To update the iXG Firmware:
1. Start the Firmware Updater application.
2. The Firmware Updater automatically checks online for a
new version of camera firmware and displays a download
button if your camera requires an update.
3. If displayed, click the link to download the firmware. The
firmware is saved locally.
4. After downloading the new firmware, the download
button becomes a Release Notes button.
5. Click the Release Notes button to download the release
notes for the newest firmware.
To Next Page
Loading...
