3130
5. Set White Balance using the White Balance picker (WB is
only for Live View).
6. Adjust the composition.
7. In the Camera focus tool, click on the focus arrows to
focus the camera’s lens.
8. Click single arrows for fine focusing and multiple arrows
for medium or large focusing.
9. To use Auto Focus, press the AF button.
10. A Focus Meter frame will appear in the center of the
image preview, you can grab and move it to the area in
the image that you wish to place focus on. The camera
will automatically move the lens Up/Down untill focus is
achieved and the frame is shown in Orange.
11. To use Fine Auto Focus, press and hold the Alt Key and then
press the AF button. The sign on the button will change and
the camera will make small adjustments to focus.
If the camera is already set to a close range from the focus
plane, you can hold the Alt key and then press the AF
button. The sign on the button changes to µAF and the
camera refocus by smaller focusing steps.
To set Fine Focus as the default mode, click on the “…” sign at
the top right corner of the Camera Focus Tool and select AF
Mode: Fine. The sign of the AF button changes as shown above.
Note: For optimal results, reduce the Focus Meter frame’s
size and zoom in to 100% on the area of interest.
12. Close the Live View window.
Fine Focus
AF Button
Changing the
default mode
to Fine Focus
To Next Page
Loading...
