Philips 22HFL4372D/10 - Page 11

9
English
EN
Addyourdevices
After you connect a device to the TV, add this
device in the home menu for easy access.
In the home menu, select [Addyourdevices],
then press OK. Follow the instructions on-
screen to add the device to the home menu.
To remove a device from the home menu,
select the item, press and select [Remove
thisdevice]. Press OK.
Setup
[Setup] in the home menu allows you to
change most of the TV settings, including:
• Picture or sound settings
• Installation or update of TV channels
• Update of TV software
• Other special features
1.
In the home menu, select [Setup], then
press OK.
2.
Select an item with the Navigation
buttons, then press OK:
• [Quickpictureandsoundsettings]:
Guides you through picture and sound
settings.
• [TVsettings]: Advanced picture and
sound settings.
• [Searchforchannels]or[Searchfor
satellite]: Guides you through antenna
or satellite (if available) channel
installation.
• [Channelsettings] or[Satellite
settings]: Advanced channel settings.
• [Updatesoftware]: Guides you
through an update of the TV software.
• [Softwaresettings]: Advanced TV
update settings.
• [Watchdemos]: Demos of special
features available with the TV.
• [Scenea]: Switches to the Scenea
wallpaper.
• [Addyourdevices] : Adds new
devices to the home menu. Note that
you must add a new device to the
home menu in order to access it.
• [Setup]:Accesses menus that allow
you to change picture, sound and
other TV settings.
Browse
The browse menu gives you easy access to:
• Electronic programme guide
• TV channel list
• Teletext
To access the browse menu, while watching
TV, press a.
1.
Press the Navigationbuttons to select an
item:
• [Programmeguide] : Accesses the
Electronic Programme Guide.
• [Channellist]: Accesses the TV
channel list.
• [Text] : Accesses teletext.
2.
Press OKto conrm your choice.
Channellist
The channel list displays the TV channels and
possible radio stations installed on your TV.
1.
While watching TV, press a.
2.
Select [Channellist], then press OK.
3.
Select a channel, then press OK to access
the channel.
4.
Press to exit the channel list without
changing the channel.