Philips 22HFL4372D/10 - Access CAM services; Use one-touch play; Use one-touch standby; Use Philips EasyLink

41
English
EN
Useone-touchplay
1 After enabling EasyLink, press play on
your device.
» The TV automatically switches to the
correct source.
Useone-touchstandby
1 Press and hold Standby on the TV’s or
device’s remote control for at least three
seconds.
» The TV and all connected HDMI
devices switch to standby.
UseaKensingtonlock
There is a Kensington security slot at the back
of the TV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
AccessCAMservices
1. After inserting and activating the CAM,
press .
2. Press Navigationbuttonsto select
[Commoninterface].
» Applications provided by the digital TV
service operator appear on the screen.
Note
• This menu option is available only if the CAM is
inserted and activated correctly.
UsePhilipsEasyLink
Your TV supports Philips EasyLink, which
enables one-touch play and one-touch standby
between EasyLink-compliant devices.
Note
• Compliant devices must be connected to your
TV via HDMI.
EnableordisableEasyLink
Note
• Do not enable Philips EasyLink if you do not
intend to use it.
1. Press .
2. Press Navigationbuttonsto select
[Setup] > [TVsettings] > [EasyLink].
3. Select [On] or [Off].