Philips 22HFL4372D/10 - Change channel settings; Reorder channels; Rename channel; Hide channels

22 EN
Changechannelsettings
Reorderchannels
After installation, you may want to reorder
the channel list to suit your preference.
1.
While watching TV, press a.
2.
Select [Channellist], then press OK.
3.
In the channel list, press .
4.
Select [Reorder], then press OK.
5.
Select the channel to reorder, move it to
the desired location, then press OK.
6.
Select [Insert] to insert the channel into
the desired location, [Swap] to swap
location with another channel or [Cancel]
to cancel the reorder.
7.
Press OK to activate.
Renamechannel
After installation, you may want to rename
channels to suit your preference.
1.
While watching TV, press a.
2.
Select [Channellist], then press OK.
3.
In the channel list, press .
4.
Select [Rename], then press OK.
5.
In the entry screen that appears, press
the Navigationbuttons or Numeric
buttons to edit the name, then press OK.
6.
Once complete, press the Navigation
buttons to select [Done].
• To clear the entry, select [Clear].
• To cancel, select [Cancel].
7.
Press OK to conrm your choice.
8.
Press to exit.
Hidechannels
Hide channels from the channel list, to
prevent unauthorised access.
1.
While watching TV, press a.
2.
Select [Channellist], then press OK.
3.
In the channel list, select the channel to
hide, press
.
4.
Select [Hidechannel], then press OK.
The channel is hidden.
Unhidechannels
1.
While watching TV, press a.
2.
Select [Channellist], then press OK.
3.
In the channel list, press .
4.
Select [Showhiddenchannels], then
press OK. Hidden channels appear in
the channel list, but without channel
information displayed.
5.
Select the channel to unhide, then press
.
6.
Select[Unhidechannel], then press OK.
Repeat steps 5 and 6 to unhide other
channels.
Updatechannellist
When the TV was switched on for the
rst time, a full installation of channels was
performed.
You can set the TV to add or remove digital
channels automatically. You can also manually
start the channel update.
Automaticupdate
To set the TV to update digital TV channels
automatically, leave the TV in standby mode.
Once a day, the TV updates earlier found
channels and stores new channels. Empty
channels are removed from the channel list.
If a channel update is performed, a message
appears at startup.