Philips 22HFL4372D/10 - Setup settings; PBS Setup; Welcome message; Local Keyboard lock

31
English
EN
Layer 1Layer 2Layer 3Layer 4
Channel setup
Enter TV Channel Setup<Action>
Store Settings
Smart Clone
USB to TV<Action>
TV to USB<Action>
RF Download
SW typesSSB Firmware / SSB NVM /
Standby Firmware /ThemeTV /
All
Program InfoFrequency, Medium, Service ID,
ONID, NID, TSID, Symbol Rate,
Modulation
Start Download<Action>
Setupsettings
PBS Setup
[PBS Setup menu language]
Select menu language to be English, French,
German or Italian.
[PBSmode]
Enables / disables the Professional mode.
[On]:All settings in theProfessional mode
Setup menu are in effect.
[Off]:The TV operates as a normal
(consumer) TV.
Only if set to Off mode it is possible toenter
install channels (usingChannel setup)and make
other TV specific settings (i.e. brightness, .. etc).
[Room ID]
Entry field to store 4 character to identify Room
ID.
[Switch on settings]
[Switch on volume]
When the guest switches the TV on, it will play at the
specified volume level.
[Maximum volume]
This option specifies the maximum allowable volume
level of the TV.
[Switch on channel]
When the guest switches the TV on, it will play at the
specified channel.
[Welcome message]
The Welcome message function allows the TV to
show a customized greeting to the hotel guest
whenever the TV is switched on. This helps to
personalize the hotel experience for guests. The
Welcome message can consist of 2 lines of text,
with each line containing a maximum of 20
alphanumeric characters. Use Navigation buttons
on the remote control to compose the Welcome
message.
Note:Welcome message is always disabled if you
select [BDS Mode Setting] > [OSD display] >
[Off.]
[Display message]:
Selectto showthe welcome messageat power up
cycle:
[On] to activate,[Off] to disable
[Welcome message line 1]:
[Line 1]: Sets the characters of the first line message.
[Welcome message line 2]:
[Line 2]: Sets the characters of the second line
message.
[Control Settings]
[Local Keyboard lock]
[Off]:The TV local buttons will function
normally.
[On]:The TV local buttonsare locked,except
the [POWER] button.
[Remote Control lock]
[Off]:All buttons on Guest remote control will
function normally.
[On]:All buttons on the Guest remote control
are disabled.
(It is still possible to enter the PBS Setup menu by pressing
[3, 1, 9, 7, 5, 3,(MUTE)]).