Philips 22HFL4372D/10 - Install satellite channels; Fine-tune analogue channels; Change language settings; Audio, subtitle, teletext languages

25
English
EN
1.
Press .
2.
Select [Setup] >[Channelsettings] or
[Satellitesettings] > [Language].
3.
Select one of the following settings, then
press OK:
• [Primaryaudio]/[Secondaryaudio] :
Selects the available audio language for
digital channels.
• [Primarysubtitles]/[Secondary
subtitles]: Selects the available
subtitle language for digital channels.
• [PrimaryText]/[SecondaryText]:
Selects the available teletext for digital
channels.
• [Hearingimpaired]: Enables or
disables hearing impaired subtitles.
• [Visuallyimpaired](UKonly): Selects
the device for audio output.
• [Volume-Visuallyimpaired](UK
only): Adjusts the volume of the
visually impaired audio. 
• [Preferredaudioformat] : Select
[Standard] to receive standard audio
format (MPEG). Select [Advanced] to
receive advanced audio formats (AAC,
EAC-3 or AC-3 if available).
• [Mono/Stereo]: Select[Mono] or
[Stereo] if stereo broadcasting is
available.
4.
Press to exit.
Tip
•
Set a secondary language in the same menu. You
receive this language if the primary language is
unavailable.
Menulanguage
1.
While watching TV, press .
2.
Select [Setup] > [TVsettings] >
[Preferences] > [Menulanguage].
3.
Select a menu language from the list, then
press OK.
Installsatellitechannels
(For certain models only)
If your satellite is connected to the SAT
connector, you can receive satellite channels.
1.
While watching TV, press .
2.
Select [Setup] > [Searchforsatellite] >
[Reinstallchannels].
3.
Follow the on-screen instructions to
complete the installation of satellite
channels.
4.
Once complete, select [Finish], and then
press OK.
Fine-tuneanaloguechannels
If the reception of an analogue TV channel is
poor, try ne tuning the TV channel.
1.
Press .
2.
Select [Setup] > [Channelsettings] >
[Channelinstallation] > [Analogue:
Manualinstallation] > [Finetune], and
then press OK.
3.
Press ▲▼ or ▼to ne tune the channel.
4.
When the correct channel frequency is
selected, select [Done], and then press
OK.
5.
Select [Storecurrentchannel] to store
the ne tuned channel under the current
channel, or select[Storeasnewchannel]
to store under a new channel number.
Changelanguagesettings
Audio,subtitle,teletextlanguages
Digital TV channels may stream several
audio, subtitle and teletext languages with
a broadcast. Set preferred languages when
multiple languages are available.