Philips 22HFL4372D/10 - Install analogue channels; Install digital channels

24 EN
4.
Select one of the following settings:
• [Antenna(DVB-T)]: Access free-to-
air antenna or digital DVB-T channels.
• [Cable]: Access cable or digital
DVB-C channels.
3.
Press OK to conrm your choice.
4.
Press to exit.
The TV switches to the selected channel list.
AccessDVB-Schannels(forcertain
modelsonly)
If your satellite is connected to the SAT
connector, you can receive satellite channels.
Press > [Watchsatellite] to watch satellite
channels.
Installanaloguechannels
This section describes how to search and
store analogue TV channels manually.
Step1:Selectyoursystem
Note
•
Skip this step if your system settings are correct.
1.
While watching TV, press .
2.
Select [Setup] > [Channelsettings] >
[Channelinstallation] > [Analogue:
Manualinstallation] > [System], then
pressOK.
3.
Select the system for your country or
region, then press OK.
Step2:SearchandstorenewTVchannels
1.
In the [Analogue:Manualinstallation]
menu, select[Findchannel], then press
OK.
2.
Press:
• The Navigationbuttons or Numeric
buttons to manually enter the channel
frequency.
• The Navigationbuttons to select
[Search]. Press OK to automatically
search for the next channel.
3.
When the correct channel frequency is
entered, select [Done], then press OK.
4.
Select [Storecurrentchannel] to store
the ne tuned channel as the current
channel number, or select [Store as new
channel] to store it as a new channel
number.
Installdigitalchannels
You can reposition your antenna to improve
the reception. You need to know the correct
frequency to tune. For best results, contact
the service provider or get a professional
installer.
1.
Press .
2.
Select [Setup] > [Channelsettings]
> [Channelinstallation] > [Digital:
Receptiontest] > [Search], then press
OK.
3.
Press the Numericbuttons to enter the
channel frequency.
4.
Select [Search], then pressOK.
5.
When the correct channel is located,
select [Store], then press OK.
6.
Press to exit.
Note
•
If the reception is poor, reposition your antenna
and repeat the procedure.
•
If you receive the channel with DVB-C, the
options [Symbolratemode] and [Symbolrate]
are available.
In [Symbolratemode], select [Automatic]
unless your cable provider supplies you with a
specic symbol rate value.