26 EN
Changeothersettings
Energy-efcientsettings
1.
While watching TV, press the green
button.
2.
Select one of the following settings, then
press OK:
• [Energysaving]: Applies a
combination of picture settings to
reduce energy consumption.
• [Mutescreen] : Turns off the TV
display. ‘Muting’ the screen saves
energy if you just want to listen to
audio from the TV.
Audiolipsync
Turn on digital audio lipsync to automatically
sync the image on your TV to audio from a
connected Home Theatre System.
1.
While watching TV, press .
2.
Select [Setup] > [TVsettings] >
[Preferences] > [AudioOutdelay] >
[On], then press OK.
TVclock
You can display a clock on the TV screen. The
clock displays the current time using time data
received from your TV service operator.
DisplaytheTVclock
1.
When watching TV, press .
2.
Select [Status], then press OK.
The clock is displayed on the bottom right-
hand corner of the TV screen.
Changetheclockmode
By default, the clock mode is set to
[Automatic], syncing the TV clock to
Coordinated Universal Time (UTC). If your
TV cannot receive UTC transmissions, set
the clock mode to [Manual]. [Country
dependent]applies UTC and gives you the
option of setting [Daylightsaving].
1.
While watching TV, press .
2.
Select [Setup] >[TVsettings] >
[Preferences] > [Clock] > [Autoclock
mode].
3.
Select [Automatic], [Manual] or
[Countrydependent], then press OK.
Enableordisabledaylightsaving
If clock mode is set to [Countrydependent],
enable or disable daylight saving if required for
your time zone.
1.
In the [Clock] menu, select [Daylight
saving] > [Daylightsavingtime] or
[Standardtime], then press OK. Daylight
saving is enabled or disabled for your time
zone.
Settheclockmanually
If clock mode is set to [Manual], set the date
and time manually.
1. In the [Clock] menu, select [Date] or
[Time], then press OK.
2. Use the Navigationbuttons to make your
selection, then select [Done].
TVlocation
A range of TV settings are applied to suit the
location of the TV.