Philips 22HFL4372D/10 - Shop or home mode; Stand mount or wall mount; Update software; TV: Check version

27
English
EN
Shoporhomemode
The exibility to change settings is limited if
the TV location is set to[Shop] mode. Set the
TV location to[Home] mode to access all TV
settings.
1.
While watching TV, press .
2.
Select [Setup]> [TVsettings] >
[Preferences] >[Location]>[Home] or
[Shop], then press OK.
3.
Restart the TV.
Standmountorwallmount
Specic TV settings are applied to suit the
mounting location of the TV.
1.
In the [Preferences] menu, select [TV
placement] > [OnaTVstand] or [Wall
mounted], then pressOK.
Updatesoftware
TV:Checkversion
1. Press .
2. Select[Setup] > [Softwaresettings] >
[Currentsoftwareinfo], then pressOK.
The version of the current software is
displayed.
TV:USBupdate
Before performing this procedure be sure to:
• Set aside some time to complete the
entire update.
• Have available a USB ash drive with at
least 256 MB of storage space.
• Have access to a computer with a USB
port and internet access.
1.
Press .
2.
Select [Setup] > [Updatesoftware], then
press OK. The update assistant starts.
Follow the on-screen instructions to
complete the update
Note
•
If you already have the upgrade le
downloaded onto a USB ash drive,
connect it to the TV. Then, select [Setup] >
[Softwaresettings] > [Localupdates].
TV:Internetupdate
If your TV is connected to a router that is
connected to the Internet, you can update the
TV software directly from the Internet. You
need a high speed Internet connection.
Press
> [Setup] > [Updatenow] and press
OK.
Select [Internet] and pressOK. Follow the
instructions on screen.
When the update is done, the TV switches off
and back on again automatically. Wait for the
TV to switch back on; do not use thePower
switch on the TV.
If the TV is connected to the Internet, the TV
displays a message about the availability of
new software at start-up.