Philips 22HFL4372D/10 - Watch TV

10 EN
Toswitchtostandby
• Press B (Standby-On) on the remote
control.
» The front LED indicator switches to
red.
Toswitchoff
• Press B POWER at the side of the TV.
» The standby indicator switches off.
Tip
•
Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
Switchchannels


• Press P+/- on the remote control or P/
CH+/- on the side of the TV.
Options
Option menus offer convenient settings
related to what is on-screen.
1.
Press to see what options are
available.
2.
To exit, press again.
WatchTV
Swith on/off or to standby


Toswitchon
• If the standby indicator is off, press B
POWER at the side of the TV.
• If the standby indicator is red, press B
(Standby-On) on the remote control.
Note
•
The front LED indicator does not turn on when
the TV is switched on.
•
The TV requires some time to start up. During
this time, the TV will not respond to the remote
control or side controls. This is normal behavior.