Philips 22HFL4372D/10 - Smart sound settings

21
English
EN
• [Pictureformat] : Changes the picture
format.
• [Screenedges]: Changes the picture
size.
• [Pictureshift]: Adjusts the position of
the picture. Not applicable if selected
picture format is[Autozoom] or
[Widescreen].
Smartsoundsettings
Use the [Smartsound] experience bar to
access frequently-used sound settings.
1
Press .
2
Select [Setup]> [TVsettings] > [Sound]
>[Smartsound], then press OK.
3
Select one of the following settings:
• [Personal] : Sets the TV to your
personal preferences.
• [Standard]: Adjusts sound settings to
suit most environments and types of
audio.
• [News]: Applies sound settings ideally
suited for spoken audio, such as the
news.
• [Movie]: Applies sound settings ideally
suited for movies.
• [Game] : Ideal settings for gaming.
• [Drama] : Applies sound settings
ideally suited for drama.
• [Sports] : Applies sound settings
ideally suited for sports.
4
Press OK to conrm your choice.
5
Press to exit.
Moresoundsettings
1
Press .
2
Select [Setup]> [TVsettings] > [Sound]
, then press OK.
3.
Select a setting to adjust:
• [Smartsound]: Accesses pre-dened
smart sound settings.
• [Reset]: Resets to factory default
settings.
• [Bass]: Adjusts the bass level.
• [Treble]: Adjusts the treble level.
• [Surround]: Enables spatial sound.
• [Headphonesvolume] : Adjusts
headphone volume.
• [Autovolumeleveling] : Automatically
reduces sudden volume changes, for
example, when switching channels.
• [Balance]: Adjusts the balance of the
left and right speakers to best suit
your listening position.
Resettofactorysettings
Resetting your TV to factory settings restores
default picture and sound settings.
Channel installation settings remain the same.
1
Press .
2
Select [Setup]> [TVsettings] >
[Factorysettings] , then press OK.
TV settings are reset back to the factory
default.
StartaTVdemo
Start a demo to nd out more about your
TV’s features.
1
Press .
2
Select [Setup]> [Watchdemos], then
press OK.
3.
Select a demo, then press OK.
4.
Press to exit the demo.