Philips 22HFL4372D/10 - Visually impaired; Adjust volume for the visually impaired; Audio feedback for the visually impaired

19
English
EN
Visuallyimpaired
Some digital TV channels broadcast special
audio adapted for people who are visually
impaired. The normal audio is mixed with
extra commentary.
To switch on visually impaired audio (if
available)
1.
While watching TV, press .
2.
Select [Universalaccess], and press
the green button to enter [Visually
impaired].
3.
Use the following buttons to select:
• Red-[Off]: Turn off visually impaired
audio.
• Green- [Speakers]: Hear visually
impaired audio from speakers only.
• Yellow-[Headphones]: Hear visually
impaired audio from headphones only.
• Blue-[Speakers+headphones]:
Hear visually impaired audio from
speakers and headphones only.
4.
Press to exit.
Note
•
The green and yellow buttons are not applicable if
EasyLink Remote Control is enabled.
Tip
•
To verify whether visually impaired audio is
available, press and select [Audiolanguage].
Languages with an eye icon indicate visually
impaired support.
Adjustvolumeforthevisually
impaired
1.
In the [Universalaccess] menu, press the
yellow button to select [Mixedvolume].
2.
Press the Navigationbuttons to move
the slider up or down, then press OK.
3.
Press to exit.
Audiofeedbackforthevisually
impaired
This feature enables audio feedback when
buttons are pressed on the remote control
or TV.
1.
In the [Universalaccess] menu, press the
blue button to select [Keybeep].
2.
Press the green button to turn on audio
feedback or press the red button to turn
it off.
3.
Press to exit.