Philips 32PHT5883/67 - Use EDID; Use Timer; Change the Preferred TV Settings; Quick Boot

EN 12
Use EDID
1. Press key.
2. SelectTV Settings > EDID Version and
then press
OK
key to enter.
3. Select your needed version and then press
OK
key to confirm.
Tip

EDID is a data structure provided by a
digital display to describe its capabilities
to a video source.This settings is valid
only under HDMI source.
Use Timer
You can use Timer so as to switch the TV to
standby after the specified time.
Use Sleep Timer
Set the time when theTV is switched to standby.
Tip
 You can switch off the TV or reset the
Sleep Timer before the timer reaches
zero.
1. Press key and then select TV Settings >
Sleep Timer.The Sleep Timer is shown on
the screen.
2. Set the timer to a value between 0 to 240
minutes. If the Sleep Timer is set to 0, it will
be turned off.
3.
Press
OK
key to turn on theTimer.The TV is
switched to standby when reaching the
preset time.
Change the preferred TV
settings
1. Press key to select TV Settings.
2. Select one of the following and then press
OK
key.

Picture and Sound Reset: restore allTV
picture and sound settings to the preset
values.

EasyLink: set up EasyLink functions.

About the TV: show theTV related
information.

Key Beep: turn on the key tone of the
remote control.When you press a
button on the remote control, the TV
will make a sound.

Sleep Timer: switch the TV to sleep
mode after the preset time.

Auto Standby: Switch the TV to auto
standy mode after the preset time.

Reinstall TV: restore yourTV to default
settings.

Time Zone: set the time zone of TV.

PVR File System:
● Select disk: Select the folder where
you want to save the recording file.
●
Format start: format the external
USB device.
● Speed check: test the reading/
writing speed of the USB device.

Software update (OAD): turn on/off
software update (OAD).
Quick Boot
 Press key to select TV Settings > Quick
Boot, and press
OK
key to enter. Press

/

key to select On to enable this
function.
Quick Boot ON: ImproveTV boot up
sequence to reduce TV rebooting time.
 Press key to select TV Settings > Quick
Boot, and press
OK
key to enter. Press

/

key to select Off to disable this
function.