Software Update
Philips keeps improving our products.We
suggest that you update TV software when a
new version is launched.
Check the current software version
Press key to select TV Settings > About the
TV > Current Software Information and then
press OK key.The current software version
information will show.
Software Update
You can update the software using the following
methods:
Connect to network for automatic update.
Press key to select TV Settings > About
the TV > Auto Software Update and then
press OK key. Update the software
according to the instructions on the screen.
Update the software using an USB storage
device.
1. Press key to select TV Settings > About
the TV > Manual Software Update and then
press
OK
key. Update the software
according to the instructions on the screen.
2. Press key to select TV Settings > About
the TV > Local Update and then press
OK
key. Update the software according to the
instructions on the screen.
Note
Unplug the USB device after software is
well updated.
For software update, please use a USB
device.The use of a hard disk may result
in update failure and restarting due to
insufficient power supply.
6 Media Center
You can play pictures, videos, music and other
multimedia files in USB devices.
Play media files from USB device
connected to TV
Note
Supported storage device: make sure that
USB has been connected.
1. Switch on theTV.
2. Connect a USB storage device to the USB
port on the side of the TV.
3. Press key to display the source menu.
4. Select the USB and then press
OK
key.
5. If there are multiple USB storage devices,
select the desired USB storage device and
then press
OK
key.The browser opens.
View pictures
1. Select a folder or a picture in the browse
page and then press OK key.
2. Select a picture and then press
OK
key.
Zoom in this picture to full screen.
/: Play/Pause the picture playback.
I / I: view the previous/next picture.
: Return to the browser page.
Change picture play settings
When playing a picture, press to display the
picture playback settings menu, and you can set
the picture playback settings menu, as needed.
To Next Page
Loading...
