Philips 43HFL5114 - Channel Installation Wizard; Install RF Channels

- 111 -
7.8 Channel installation wizard
7.8.1 Install RF channels
To install channels, you have to go to the [Professional Settings] [Channels] [RF Channel Installation]
menu. In this menu you can go to [Search for Channels] or do a [Digital: Manual Installation] or do an
[Analogue: Manual Installation].
Using the [Search for Channels] you will be able to do a full channel installation. You will get below
screens after starting the installation.
Note: Some screens will be shown depending on your settings or selections made, some screens will not
be shown. Also, the content of the screens is depending on your selections
Note: Both SPTS and MPTS (Single and Multiple Program Transport Stream) are supported
o
You can [
Start
] to start the installation or
[Cancel] to exit back to TV last status