Philips 43HFL5114 - Install Netflix on TV; Capture TV Logs to USB

- 74 -
o
[
Audio Out Format
]:
Set the audio out
signal of the TV to fit with the sound
capabilities of the connected Home
Theatre System to [Stereo
(uncompressed)], [Multichannel],
[Multichannel (bypass)] or [Dolby
Digital Plus]
o [Audio Out Leveling]: Select the level
out of the volume of the Home Theatre
System and the TV when switching
over from one to the other to [More],
[Medium] or [Less]
o [Audio Out Delay]: Switch the delay if
a sound delay is set on the Home
Theatre System to [On] or [Off]
o [Audio Out Offset]: Set an audio offset
by changing the slider value if you
cannot set a sound delay on the Home
Theatre System
Note: This can only be changed if
[Audio Out Delay] is set to [On]
6.15.3 Audio Language Preference
o
Navigate to the
[
Audio L
anguage
Preference] menu
o You will see below items:
o [Primary Audio]: Select the highest
preference for audio language in
broadcast
o [Secondary Audio]: Select the next
preference for audio language in
broadcast
Note: For all the above items, make
your selection and press “OK” to
confirm your selection
6.15.4 Subtitle Language Preference
o
Navigate to the [
Subtitle
Language
Preference] menu
o You will see below items:
o [Primary Subtitles]: Select the highest
preference for subtitle language in
broadcast
o [Secondary Subtitles]: Select the next
preference for subtitle language in
broadcast
o [Primary Text]: Select the highest
preference for text language in
broadcast