Philips 43HFL5114 - LocalCustomDashboard in Clone File; Edit Hotspot Terms & Conditions

- 73 -
o
Navigate to the
[
Sound
]
[
Sound
Management] menu
o You will see below items:
o [TV Speakers]: You can set the TV to
play sound on TV using [On] or on the
connected audio system using
[Easylink Autostart] or you can disable
the speakers using [Off]
Note: The audio system (supporting
ARC) must be connected via HDMI
o [Headphone/Bathroom speakers]: No
audio will be played via the
Headphone/Bathroom speakers when
[Off], it will be heard when [On] and a
device is connected
o [Headphone/Bathroom Spk Fixed
Vol]: When [On], the volume level of
the Headphone/Bathroom speaker
will be fixed to the Switch on Setting
o [Headphone Detection]: When the
Headphone Detection is set to [On]
and the headphone is connected then
TV speakers shall be muted
automatically. When [Off], the guest
has to manually mute the TV speakers
o
Navigate to the
[
Sound
]
[
TV Placement
]
menu
o You will see [On the Wall] and [On a
stand]. Depending on your selection you
will optimize the sound acoustics of the
TV for the placement of your TV
o
Navig
ate to the
[
Sound
]
[
Advanced
]
menu
o You will see below items:
o [Surround Mode]: Select the sound
effect for the internal TV, you can
choose [Stereo] or [DTS TruSurround]
Note: You can only change this is the
[Sound Style] is set to [Personal] in the
switch on settings
o [Auto volume]: Select [DTS
TruVolume] or [Night mode] if you
want to enable to level out sudden
volume differences or [Off] if you want
to disable
o [Clear Sound]: Select if you want to
enable Clear Sound to improve the
sound for speech [On] or [Off] if you
want to disable