Philips 43HFL5114 - Remove Channels; Re-number Channels; Channel Installation Wizard; Install RF Channels

- 48 -
6.8.9 Clock
o
Navigate to the [
Clock
] menu
. Here you
can make changes for the (external) clock.
In order to have a functional external clock
the [Advanced][Power][Standby Mode]
needs to be set to [Fast]
o You will see below items:
o [Display Clock on Radio Channel]:
When you are on a radio channel you
will see a radio background when [No]
is selected, when [Yes] is selected you
will see a clock instead of the radio
background
o [External Clock]:
 [External Clock]: You disable the
external clock via [Off] or enable it
via [On]
 [Brightness at Low light]: Via a
slider you can set the clock
brightness at low light environment
 [Brightness at Intense Light]: Via a
slider you can set the clock
brightness at intense light
environment
 [Light sensor Sensitivity]: Via a
slider you can change the light
sensor sensitivity
Note: Above menus are only
accessible when [External Clock] is
set to [On]
6.8.10 Scheduler
o
Navigate to the [
Scheduler
] menu
o You will see below items:
o [Enable]: You can enable the scheduler
using [Yes] or disable using [No]
o [Manage]: You will be able to manage
the Scheduler, see chapter ‘Manage
Scheduler’ for more details
6.8.11 Banner
o
Navigate to
the [
Banner
] menu
, this can
for example be used to send an html page
to the customers TV asking to fill in an
Instant customer satisfaction survey
o You will see below items:
o [Enable]: You can enable the banner
feature using [Yes] or disable using
[No]
o [Source]: You can set the source for
the banner to [Server] or [Local]