Philips 43HFL5114 - Custom Dashboard (CDB) Setup; Browser-Based Custom Dashboard; App-Based Custom Dashboard

- 70 -
o
Navigate to the [
Diagnostic Logging
]
menu
o You will see below items:
o [Enable]: You can enable diagnostic
logging via [Yes] or disable it via [No]
o [Destination]: You can set the location
where the data should be stored to
[Internal], [Portal], [USB] or [Server].
Note: [Portal] needs to be selected in
order to have Netflix available
o [Server URL]: You can set the server url
to where the logs need to be stored
Note: This will only be selectable when
[Destination] is set to [Server]
o [Frequency]: This is the frequency
interval in seconds for diagnostic
logging
o
Navigate to the [
Select TV Control App
]
menu
o You will see below items:
o [Off]: You can use the TV in normal
mode
o [Crestron Connected]: You can use the
TV in normal mode and you can also
control the TV using Crestron Connect.
When you press “OK” you will open the
configuration wizard of the Crestron
connect
Note: See more details in the ‘Crestron
Connected wizard’ chapter
6.15 TV Settings
o
Navigate to the [
Advanced
]
menu
o You will see the screen on the left