- 90 -
Once logged in you will go to the portal page:
On the left side, there are 5 buttons:
Account: Here you can find and edit the details of your account. This includes the ‘App Control
ID’ and ‘PIN Code’ that you will need to configure a TV
Locations: Here you can configure locations where TV’s are installed but this is not required,
this location might be used later on for statistics information. When you add a location
When adding a location, you will be requested to fill in a Geonames ID. You can find the ID on
www.geonames.org, search for your location, open it and check the location ID as marked in
the screenshot below
Statistics: This page will be used to find statistics linked to your account
To Next Page
Loading...
